AMT Wi5IIC Wireless Micro Clip-On Transmitter & ZRIII Dual Receiver

The AMT Wi5IIC "Clip On" wireless system for AMT Microphones.

The Wi5IIC is the answer for any player looking for a belt pack free wireless system. The Wi5IIC will clip on and off of all AMT model microphones. Designed, manufactured, and distributed by AMT throughout the world. The Wi5IIC “Clip on” wireless system creates the belt pack free operating environment. The system is designed to clip on and off of all AMT microphones by using a hand-machined clip that locks onto various mounting brackets throughout the microphone lineup. Because the Wi5IIC will clamp onto to all AMT models, the microphones can also be used wired with optional AMT preamp’s. 

Dual Receiver 
The ZRIII receiver will allow two microphone / transmitter setups to be used with one receiver. The ZRIII receiver includes two separate outputs on the back panel for complete control over each microphone / transmitter channel.

Multi – Channel 
The Wi5IIC now includes 99 selectable channels. Control of the channels is changed via infrared controls from the receiver to the transmitter.

“Clip On” 
Since the transmitter will clip on to all AMT models, it is very simple to use your microphone wired with any of the available AMT preamps. If you’re a doubler and require multiple microphones, the same transmitter can be changed from microphone / instrument to second and even third setup. Use two setup’s at the same time.

Rechargeable Battery
With all modern devices, battery life is very important. The Wi5IIC transmitter includes a lithium-ion rechargeable battery which can be recharged over 1000 times and gives 4-5 hours of continuous use. Charge the transmitter on the break and you’ll be ready for the next gig. Digital LCD Displays Both the transmitter and receiver include illuminated LCD displays for easy visibility on dark stages, or poorly lit clubs or concert halls. Detachable Antenna’s Detachable antenna’s allow for the addition of a rack and booster kit.

Mute & On / Off Button
The Wi5IIC transmitter includes a mute button as well as an on / off switch for saving battery life on the breaks. Audio Outputs The rear panel of the ZRIII receiver include an A & B Output for each side of the Dual receiver. A ¼ inch output is also included which parallels output A.

Receiver Features: 

• UHF 600-930 MHz band to avoid interference.
• Automatic frequency scan searches for available frequencies
• PLL system. 
• Preset 99 non-interfered channels. 
• Adjustable 560 free frequencies
• Splendid LCD display, shows the RF level, AF level, channel and frequency
• High efficiency battery design, the microphone can be used continuously for 6 hours.
• Using high gain antenna, 50 meters range at the clearing. 
• Half rack space design, 2 systems can be connected to complete one full rack space. 

Specifications:

• Carrier Frequency: UHF600-930MHz 
• Frequency Stabilization: 95dB 
• Total Harmonic Distortion：95dB
• Image & Spurious Rejection: >80dB
• Border Upon Channel Rejection: >80dB
• Receiving Sensitivity: 5dBuV
• De-Emphasis: 50uS